Everything you need to know about screw head and drive styles

Posted on

  • Leave a comment on Everything you need to know about screw head and drive styles

    When you talk about fasteners, it might confuse you about what option to opt for. As the availability of fasteners is in excess, and when you go shopping to get your project to the stage of success, there’s nervousness and excitement. To be sure that everything happens with ease and you are well-aware of each of the fastener types, better get hold of the Fasteners Manufacturer to ensure precision in everything. In this blog, I will make you familiar with choosing the necessary screw head and drive styles to allow the workflow of the project to go in the proper manner.

    Are you looking for quality bolts?

    Look for the  Bolts Supplier who has been serving the customers with all sorts of bolt needs for a long time and, most importantly, with top-quality and effectiveness.

    Get clarity overhead and drive style

    The initial factor is understanding the difference, allowing one to opt for the perfect style. Moreover, you should seek the right design that provides precision in every step. It is nerve-wracking at times to be sure about which option is suitable. The availability of different styles like:

    • Button
    • Binding
    • Flange
    • Hex
    • Pan
    • Round
    • Socket
    • Low socket
    • Truss heads
    • Square heads

    Seeing such a vast variety in itself can make things challenging to consider, and that is why professional assistance is essential to make the selection in the proper manner.

    The countersunk design varies slightly in nature

    If you go with the countersunk design, you can get the oval, flat, and bugle heads. Undoubtedly, the selection of materials does wonders for flat, soft, and oval heads. There is a need to make countersunk holes. Under this situation, just a little head protrudes from it, and the presence of material won’t get affected. If you choose something necessary for finish work, then better look for the flat head screw cover so that the head is not seen through the same.

    Drive style is all crucial part of the fasteners

    Drive style/drive recess uses tools for screw installation with precision. The most common ones that you can opt for are:

    • Slotted style
    • Phillips style
    • A combination of both is also possible: Slotted and Phillips
    • Hex socket
    • Square
    • Spanner
    • Torx

    It’s all about choosing the right kind of style and might be the combination when needed.

    Is it possible to prevent head damage?

    To limit the head damage through this option, you need to ensure the screw head is matched to the driver for precise working. Don’t mistake using something small slotted with a large slotted screw.

    Are you looking for fasteners of a particular variety?

    So, whether it’s quality or getting the product on time, MIG Enterprise’s entire team makes sure to get all things done in the right manner.

    What Are Socket Screws And Is It Better Than Regular Screws?

    Posted on

  • Leave a comment on What Are Socket Screws And Is It Better Than Regular Screws?

    Today we will talk about various socket screws and their types, designs, and material that rae used for fixing and installing. We would also discuss what socket set screws would be the best for particular applications and requirements. There are different ranges of screws, and according to the requirement, each is explicitly used. 

    What Are Socket Screws?

    Let us begin with the definition of socket screws. It is a type of screw manufactured and designed with a hexagonal internal drive built in the head. They are meant to be loosened and tightened with the assistance of a hex key or Allen wrench compared to the traditional screwdrivers. It is the main component that sets a socket screw set apart from some other screw head drives. These screw head drives include flathead and slot head screw, Philips head screw, and pozidriv screws.

    There are some other differences between them: socket screws are most often squared off at the tip, whereas the general ones are not. These are usually referred to as flat point socket screws. They are also a standard and widely used screws type primarily found in some of the most standard applications. You can not dismiss the idea that there are other various designs too which are available.

    To conclude this, you would not be able to differentiate between the socket screws and the regular screws on most of the daily uses of such applications. So what is unique about socket screw, and why and where must it be applied for.

    Basically, it is a combination of some of the most high-performance features of some very common and standard hex fasteners. We are here mostly referencing the Bolts Supplier and the nuts systems. But on top of the increased performativity, it also serves the purpose of being convenient and easy to use of a typical format screw set. In many situations and circumstances, this middle ground could show its benefits- specifically on occasion when the mechanic is working in an area that does not have any access to stabilize the outwardly wrenched hex fasteners. 

    What Are The Advantages Of Socket Screws?

    With a socklet screw, it can achieve the clamping force and higher torque that could be achieved with the help of a socket screw rather than the regular screw. This is the reason why most Fasteners Manufacturer often uses this option for some specific applications. When we compare the socket screw with bolts or some traditional screws in the “like for like” test, it is seen that the socket screw most often offers many or all the advantages that are stated below.

    Since it usually gives a greater clamping force as compared to any other screws and some other small format types of fasteners. With the help of fewer socket screws, it can be used for providing the same clamping force in the application, joint, or workspace. If you use fewer socket screws, then it woudl mean that

    • Reduced hardware cost
    • The weight of the overall piece would be less.
    • Few holes to tap and drill in the mounting surfaces.