Today we will talk about various socket screws and their types, designs, and material that rae used for fixing and installing. We would also discuss what socket set screws would be the best for particular applications and requirements. There are different ranges of screws, and according to the requirement, each is explicitly used.
What Are Socket Screws?
Let us begin with the definition of socket screws. It is a type of screw manufactured and designed with a hexagonal internal drive built in the head. They are meant to be loosened and tightened with the assistance of a hex key or Allen wrench compared to the traditional screwdrivers. It is the main component that sets a socket screw set apart from some other screw head drives. These screw head drives include flathead and slot head screw, Philips head screw, and pozidriv screws.
There are some other differences between them: socket screws are most often squared off at the tip, whereas the general ones are not. These are usually referred to as flat point socket screws. They are also a standard and widely used screws type primarily found in some of the most standard applications. You can not dismiss the idea that there are other various designs too which are available.
To conclude this, you would not be able to differentiate between the socket screws and the regular screws on most of the daily uses of such applications. So what is unique about socket screw, and why and where must it be applied for.
Basically, it is a combination of some of the most high-performance features of some very common and standard hex fasteners. We are here mostly referencing the Bolts Supplier and the nuts systems. But on top of the increased performativity, it also serves the purpose of being convenient and easy to use of a typical format screw set. In many situations and circumstances, this middle ground could show its benefits- specifically on occasion when the mechanic is working in an area that does not have any access to stabilize the outwardly wrenched hex fasteners.
What Are The Advantages Of Socket Screws?
With a socklet screw, it can achieve the clamping force and higher torque that could be achieved with the help of a socket screw rather than the regular screw. This is the reason why most Fasteners Manufacturer often uses this option for some specific applications. When we compare the socket screw with bolts or some traditional screws in the “like for like” test, it is seen that the socket screw most often offers many or all the advantages that are stated below.
Since it usually gives a greater clamping force as compared to any other screws and some other small format types of fasteners. With the help of fewer socket screws, it can be used for providing the same clamping force in the application, joint, or workspace. If you use fewer socket screws, then it woudl mean that
- Reduced hardware cost
- The weight of the overall piece would be less.
- Few holes to tap and drill in the mounting surfaces.