What are the different types of fasteners and which one you should use?

What are the different types of fasteners and which one you should use?
Posted on

  • The Fasteners Manufacturer can fulfill all your demands and they can give you various types of fasteners. Fasteners Suppliers in Australia helps to provide the clients with different head types, materials, and drive types. In this blog, we are going to make you understand various options which you can choose from to ensure that your application runs correctly.

    What you should know?

    Screws These are fastener components which are dug into the material and turned around.
    Thumb screws & knobs Perfect choice for non-structural uses
    Bolts These typically untapered and nuts are needed to make it tight.
    Nuts It is the fastener which comes with a threaded hole and then mating bolt is needed.
    Panel fasteners On the edges or through holes, the components are attached to panels.
    Rivets 2 materials are joined together through the tool or hand, and depending on the type of rivet.
    Washers Evenly distributes a threaded fastener’s load to minimise risk of damage to materials


    Let’s have a closer look to understand the various types of fasteners:


    Through the use of screws, they will stop to one point to get driven to the surface. House the screw because this way the screw will be turned. Some of the common types are:

      • Binder
      • Flat
      • Hex
      • Oval
      • Truss
      • Fillister
      • Pan
      • Socket head

    Thumbscrews and knobs

    Well! This choice has a distinctive look and depending on their function they are described. The most common types which this choice are:

      • Tall, Knurled head
      • Vertical flat head

    Both of these options have a blunt nose and the heads are easy to make a grip. Through this, you can tighten or loosen them when needed. This is the preferable choice for covers of battery, electronic devices, and front panels which needs easy access.

    Do you need extra grip for tightening?

    You should get the thumbscrews because they are available in a different range of thread sizes, heads help in the head provides added leverage, and Nylon 6/6.


    Bolts are often confused with screws as they provide the same functioning. Through this 2 unthreaded components are joined whereas with screws the threaded components are joined together. While you can even get them in different head types and depending on the tools these are designed and tightened.


    Nuts are threaded holes that work together with bolts and increase the strength of parts that are together. Its shape is hexagonal and it is only present in the exterior and its interior is cylindrical. 6 sides make the hex nut easier to grip which helps in easy installation or removal. It helps in protecting the exposed bolt threads while also it improves safety. Through this option, it will provide a smoother appearance.

    What is the need for easy grip, removal, and installation?

    Plastic Hex Nut – Standard

    Through this approach hex shape is used for easy grip as they are easy to install and removing them is easier. These are lightweight in comparison to metal nuts. Perfect choice for the outdoor application. These are resistant to abrasion, oil, and most chemicals.